Search results

It's actually 5/8" OD tube which is a 7/8"-14 thread. And, yes, for 1/2" ID hose. It swivels until tightened. Discount Hydraulic Hose or McMaster-Carr Also, if you'd like, I will offer mine to you "pay-it-forward". It is surplus to me, but it is good used serviceable. If so, PM me with your info.

Is this the push-lock fitting you are looking for... I believe it is a 37/45 degree dual seat.

The primer pump o-rings are Brasscraft SC0562 or 3/8" I.D. x 1/2" O.D. x 1/16" wall I eliminated the selector valve and pull fuel to the left tank from the right using a frame mounted transfer pump. I also replaced all the fuel lines with AN fittings and braided nylon/steel hose.

Yes, correct. The winches are the same and will bolt up to either extension set up.

The M939-series and the M809-series frame extensions are different. They are not interchangeable as delivered. I have not done it, but there may be a possibility they can be modified. These are the M809 specific extensions and brackets (w/ part numbers) you need to mount up the 20K winch.

This is the pump part number: 26VQ14A-1C-20. The spec sheet is attached. See page 15 for this pump's specs.

It is the pump designated for the 20K winch. It mounts (on an M939-series truck) inside the frame rail on a 90-degree bracket (I have this also). According to the spec sheet I have, it makes 14GPM at 1200rpm/100psi (I can attach spec sheet later). It is PTO driven. It only requires a filter (I...

I just ordered some paint masks from Dave. I applied them this past weekend. They are on par with Rick's work.

Thank you for the link. I’ll check them out.

Militarystencils.com When you pull it up there’s no web store just a banner indicating they are currently closed and not taking orders.

Does anyone know the status of Rick Larsen's on-line store? I am going through a repaint/refresh and am in need of new bumper numbers. His work has always been of the highest quality and incredibly durable.

No, that I don’t have.

As mentioned before, the hurdle is adapting the hydraulic motor mounting to clear the front crossmember. I was going to do the mod after a transmission upgrade. I later decided not to and stick with the mechanical drive. I do have the pump, pump bracket, and the frame mounted oil tank. I also...

You can drive an HV plated vehicle for maintenance and shows/exhibitions. Maintenance can mean anything from getting fuel to washing it to "exercising"...well...anything that moves. I highly doubt a LEO is going to follow to the pump or washrack. When I drive my truck, someone always stops to...

Yes. All that is required is the connection of the #5 wire to the positive terminal.

This screw...

I checked their website last night and all those part numbers specific to your style bed are still on it. However, there are no prices listed anymore. https://www.stephanwoodproducts.com/wp-content/uploads/2016/05/Product-list.pdf Yeah, I get it. Plus, even if you do try to reuse the original...

Have you inquired with Stephan Wood Products? https://www.stephanwoodproducts.com/ I have an older price list from them that lists all part numbers that come back for that bed in the -34P-1... 8758138: 14' Right side seat & back assembly 8758124: 12' Left side seat & back assembly 8758064...

Did you ever find storage?