• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Injection pump oil hose

rustystud

rustystud

Well-known member
9,254
2,941
113
Location
Woodinville, Washington
This is just a message to all members here. If you haven't replaced your injection pump hoses then get a set from Gimpyrobb now. Ever pump I tore down and inspected had bad hoses. They looked great on the outside, but the inside was breaking down. Also be careful when removing the line on the block. That brass fitting can break real easy ! I had to dig mine out of the block after it broke flush. I replaced it with a stainless steel fitting.
 
J

Jestertac

New member
8
0
1
Location
Tacoma, WA
looks like I'm late to the party on this one.

Can you guys tell me what the threads are so I can have some hoses made? Unless GimpyRobb still has sets available...

RustyStud, do you recall what stainless steel fitting you used? I ruined my fitting removing it and I'm not sure if I still have it or accidentally threw it away. Hopefully I can pick another one up from Williams Oil Filter in Fife
 
rustystud

rustystud

Well-known member
9,254
2,941
113
Location
Woodinville, Washington
Jestertac said:
looks like I'm late to the party on this one.

Can you guys tell me what the threads are so I can have some hoses made? Unless GimpyRobb still has sets available...

RustyStud, do you recall what stainless steel fitting you used? I ruined my fitting removing it and I'm not sure if I still have it or accidentally threw it away. Hopefully I can pick another one up from Williams Oil Filter in Fife
Click to expand...
Are you referring to the block fitting ? That was a 45degree 1/4" NPT by 4AN fitting. I had "Hydraulic Supply" in Kirkland WA. build-up the hoses for me. Now if you broke or lost the "special" two way fitting mounted on the injection pump then your in a bit of trouble. They cannot be found. I made up one myself. I posted how I did it here, somewhere. I'll try and find it for you.
 
J

Jestertac

New member
8
0
1
Location
Tacoma, WA
That would be awesome if you find it, and I will search also. It was the two way fitting that was smashed when I removed it, figuring I could replace it easily. The education continues!
 
frank8003

frank8003

In Memorial
In Memorial
6,426
4,984
113
Location
Ft. Lauderdale, Florida

Attachments

Last edited:
You must log in or register to reply here.
110,655members
165,169threads
2,324,056posts
1,518online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks