Injection pump oil hose

[TGP (IL)]

Can you put me down for a set Also?
Thanks
Tom

 

[gimpyrobb]

Yup

I'll try to go down the list as I get more sets.

 

[FLYWHEEL]

5here wasn’t enough material to have all 10 sets made. I will post a classified after I hear back from the OP. I will probably have the rest by next week.

Just checking did you receive my PM with my address

 

[Beyond Biodiesel]

If I can't find any, ill have another batch run.

The way I see it, we're at 3. Anyone else?

I am in for one of each, if that is what you are planning on doing. Please let us know how much it will be.

 

[gimpyrobb]

Classified up. Still need to get out and get the rest. I'll complete orders as they come in, please have patience.

https://www.steelsoldiers.com/showt...njection-pump-oil-lines&p=2033266#post2033266

 

[Bill W]

Received my set yesterday

 

[FLYWHEEL]

Received my set this morning, thank you

 

[CHIEFSONN]

How much , I seen you post them a short while ago Im intrested.

 

[rustystud]

This is just a message to all members here. If you haven't replaced your injection pump hoses then get a set from Gimpyrobb now. Ever pump I tore down and inspected had bad hoses. They looked great on the outside, but the inside was breaking down. Also be careful when removing the line on the block. That brass fitting can break real easy ! I had to dig mine out of the block after it broke flush. I replaced it with a stainless steel fitting.

 

[Jestertac]

looks like I'm late to the party on this one.

Can you guys tell me what the threads are so I can have some hoses made? Unless GimpyRobb still has sets available...

RustyStud, do you recall what stainless steel fitting you used? I ruined my fitting removing it and I'm not sure if I still have it or accidentally threw it away. Hopefully I can pick another one up from Williams Oil Filter in Fife

 

[rustystud]

looks like I'm late to the party on this one.

Can you guys tell me what the threads are so I can have some hoses made? Unless GimpyRobb still has sets available...

RustyStud, do you recall what stainless steel fitting you used? I ruined my fitting removing it and I'm not sure if I still have it or accidentally threw it away. Hopefully I can pick another one up from Williams Oil Filter in Fife

Are you referring to the block fitting ? That was a 45degree 1/4" NPT by 4AN fitting. I had "Hydraulic Supply" in Kirkland WA. build-up the hoses for me. Now if you broke or lost the "special" two way fitting mounted on the injection pump then your in a bit of trouble. They cannot be found. I made up one myself. I posted how I did it here, somewhere. I'll try and find it for you.

 

[Jestertac]

That would be awesome if you find it, and I will search also. It was the two way fitting that was smashed when I removed it, figuring I could replace it easily. The education continues!

 

[gimpyrobb]

Ive got it all. Pm me an address and Ill find out shipping.

 

[mweidhaas]

I could use a set as well, do you have any more available ?

 

[rustystud]

Ive got it all. Pm me an address and Ill find out shipping.

Yes Chris. Do you have any more of the two way fittings left ? I could use two if you have them. Let me know OK ?

 

[frank8003]

About these hoses. Don't even touch them until you have replacements ready to go on.

Maybe this will help some

see post 30 in here
https://www.steelsoldiers.com/showthread.php?163387-Rebuilding-the-Injection-pump

Pictures and things for the General.
















some more






more


View attachment injection pump oil lines 12282012.doc