Search results

Yes, I wouldn't want to tow a heavy load, but regular driving & light hauling they seem fine. with a 4 speed you have a lower 1st gear, should be fine.

Our Sherrif Dept. aquired 2 ex MP CUCV blazers at no cost to the county. It was through a Homeland security program. When and if they decide to dispose of them,(after a minimum amount of time, 18 months I think) the county can auction them off, the same as any other of their equipment. Different...

264GP-724E

I bought the tires for this camper project, which is now for sale. because I found the Dually [thumbzup]

???? Whadaya mean? Don't know the real answer on the amount of lift req'd Those tires rub on level ground, full turn. but I think 3 inch would do it. trimming of the lower rear portion, of the front fende rwells may still be req'g but the fenders should clear

bigbee has some M880 manuals for sale in the classified section here

Well I finally found my W400 Ambulance! I have to get er home yet. It has an automatic trans though, Thought they all had 4speeds :cookoo: 360 with air under the hood, 727 tranny, Open knuckle dana 60 up front and a 70 in the rear

Wil those M880 axles be coming back on that load? Just curious.

I have been wanting a M36 for a long time. But dang man 4k and a whole lot of maybe's Will the motor run? Maybe is the trans good? Maybe Is the Transfer case good? maybe is the spare t-case good? supposed to be. is the back axle ok? maybe ( no drive shaft hooked up) Will the winch work once...

Shooting for Friday morning, although work load just increased and deadlines shortened, so my Friday off is in jeopardy. Will be in the M880 again this year.

I am pretty sure none of the M880 / M890 series trucks came with winches. I am sure that there were Military (non M-series) Dodge trucks with a pto winch I have seen pictures of a 78 W400 with one, Also a 72 W200 ambulance owned by odjeeper (aka Brian) has a winch...

POR is AWESOME, IF you follow the directions, It will permanently stick to bare metal or rusted metal only. It will peel right off anything else like paint, dirt heavy rust flaked areas. If you scrape or grind the heavy rust off, liberally apply the POR15 with 100% coverage on the steel, both...

36 x 12.50 x 16.5 on stock M880 wheels. Truck has an extra leaf in the front. Going down the paved road the outside 1 1/2 inch of the tread does not touch. which keeps the noise down. They handle/ride better than I expected. I won't keep these on this truck long as I can't risk the fenders :cry:

I just picked up some humvee tires for my camper project, Had to test them out on the M880 1st though. :D

Hey, I won't make Friday night, still have 1 more night of prep to do. I hope to be pulling in 8ish Saturday AM. Will be heading up 65 to 32. (Open to cutting over to 33 @ Rose City to hook up with John)

and I.m still trying to find out how well those humvee rims/tires fit on Don's M886 :?

RE: M886 Dodge Power wagon I haven't heard the 400 thing, Although if there was, It was probably 400 were M893 2wd ambulances. which would have been for state side base use, no off road. If you are converting to a camper, I may be interested in some of the military parts.

This ones next weekend . 8-10 thru 8-12. The Michigan Museum of Military Transport, puts on a display in conjunction with a local Museum. Whos' going? I haven't officially committed as I am still working on the trucks taday! Thinking of bringing both the M880 and a M886. The GPW isn't...

RE: Re: RE: M880 Troop Seats http://www.tpub.com/content/trucks1.25ton/TM-9-2320-266-24P/TM-9-2320-266-24P0318.htm The fasteners I have are item #23, used in attaching item #26 to the taigate. as shown in the link. I'll figure out how many extras I have today. Edit: I took the rails off an...

Re: RE: M880 Troop Seats No extras on those parts...........but..............I do have a box of the nuts / inserts that go on the tailgate for the "cargo cover retainer bar" (don't know real name) to attach to. Far better than drilling holes all the through the tailgate!