Search results

I want a bumper sticker for my M1078 that says "Because you have a Prius"

Does anyone know if there's a commercial equivalent to the rear side window seal lock bead? I need to remove one of my rear side windows and the lock bead is in a million pieces. Or is there a surplus source?

Would be cool if someone made a PDF of it

12000 watts is 50 amps at 240 volts... and given that not everything will be running at the same.... 70 amps I would say is on the high side.

Search 44-12 Plug Or 44-12 connector

There are connectors on the e that have already had the cable cut off... Lots of copper in the cable... and scrappers like copper.

There's some wisdom here. You don't need 208 3 phase power for a coffee stand. And certainly don't need 100 amps. This is going to cost you lots of money just for the cable then let alone connectors. Unless you are looking to keep it 100% military. I do understand this. However, I would look at...

There's a cable on the e that may work... but 995.00 plus shipping

Start here http://www.mouser.com/catalog/specsheets/inhouse_Amphenol_MIL-C-22992_Proprietary_Connectors.pdf

https://www.youtube.com/watch?v=CYvxPM21YJY

That cab should buff right out... Sorry I had too,,,,

Can you screen shot the "info" tab? Is there anything that talks about config or what configurations is set? There are 2 pins that set the config of the unit. On a side note is there a wire drawing of a 5 ton FMTV? I would like to see what config pins connected and how. Also is there an M939...

I have seen newer Chevys and Fords Toyotas with worst rust than on my cab. The rust I have found on my cab isn't that bad. Problem is these trucks sit outside, are never really washed and the rubber weather stripping is dry rotted...

It looks like your software is using SAE J1708 protocol? That would explain why pins a and N have 1708... and pins D and A might be SAE J1939? I believe J1708 uses RS485 hardware to receive... Wouldn't think it would be too hard to make an adapter. Where did you get the software? Maybe a way to...

I mean a y cable for a NON c7 truck like mine. Does the dearborn III adapter talk to the whole truck, engine, trans, ABS CTIS ect... And got to ask what is a battle kill switch? and do you know your ECU part number...

Trying to figure out the pin out on the ECU and I have a question. On the "Y" cable drawing it shows pins Z and M as config 1 and config 2 and pin H as swign. Looking at the TM I see that pin M config 1 is jumpered to pin H "swign". The TM shows that pin H is 24 volts form CB40. The TM doesn't...

PLOT twist. Do you know the number for your ECU? I wonder if a y cable with work????

If I am getting an understanding the black ECU can be flashed or at least hooked up to a computer. I have not read anything about the green ECU being able to hook up to a computer. So in theory I guess you could take a black ECU and put it in a C7 truck. I don't know if this can be done with a...

Is the air filter good?

Bummer. I think I read that you said all lights on steady is a corrupted memory. Is the memory Non-volatile or is there a battery for the memory? The reason I am asking is that if there's a battery I would not want to get an older replacement unit. Also is there a decoder for the date on the...