• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. wreckerman893

    Where do I look for the laws concerning this hobby?

    Small town politics can get just as nasty as big town politics. All it takes is one sorehead to screw the pooch and land you in court defending yourself and your toys. You are doing the right thing by researching first and avoiding conflict later. I live out in the boondocks for various reasons...
  2. wreckerman893

    "How to get a HET in life..." - M1070 Acquisition thread

    The only reason I didn't get one of the HET's out of Riley is because the wife would have had to co-sign for a mortgage.:roll:
  3. wreckerman893

    M923A2 vs M931A2

    If you are going to off road a tractor you should figure out a way to get a few thousand pounds of weight over the 5th wheel for traction. We learned that the hard way in the Army.
  4. wreckerman893

    Turbo ?

    Turbos were not put on the multi-fuels to increase power. They were added to decrease the visible emissions (smoke). There might be a slight increase in power but not enough to notice. I have a naturally aspirated engine in the M275 and it pulls as good as the turbo deuces I had.
  5. wreckerman893

    Super Single wheels for M35

    I bought 4 A3 rims with brand new 395's by mistake and I'll sell them for what I have in them and I have one empty rim. I also have 7 HEMMT rims with deuce adaptors that I will sell since I'm out of the deuce business. Shipping is on you. PM if interested.
  6. wreckerman893

    Something concerning in the TM

    They are speaking in terms of a "run away engine" where for some reason the engine continues to get fuel and increase RPM until it self-destructs. This is sometimes caused by fuel in the oil reaching a high level which results in the fuel/oil mixture getting sucked into the cylinders and not...
  7. wreckerman893

    Code Enforcement Threat

    That would be my guess. You need to get this to the media immediatly. Get the local TV station that has a "Channel 3 (your channel may vary) on Your Side" segment to come out and do a story. Tell them exactly what you suspect and name names if you know them (be careful of slander/libel). There...
  8. wreckerman893

    Air Tools For My M923

    You will be disappointed using the truck air for anything larger than a 1/4 inch drive ratchet. Using a big air tool will suck the tanks dry quick.
  9. wreckerman893

    Mounting a 5th wheel trailer on a 5 ton?

    If you use an M927 without the super singles you might be ok if you used something like an Airstream trailer. My question is why not pull the RV with the truck and still have use of it for its intended purpose. When I pull my van trailer behind the M927 I'm 62 feet long but if you used a short...
  10. wreckerman893

    Question for the NHC cummins experts

    I deny everything and demand proof.:p
  11. wreckerman893

    925A2 won't start after sitting overnight

    Fuel shut off solenoid may be de-energizing. Cronic problem on the 8.3 engine. It has been discussed repeatedly.:deadhorse:
  12. wreckerman893

    Air temp vs breaks?

    Give your brakes a break.
  13. wreckerman893

    First MV recovery M923A2 out of sparta

    Welcome to the Green Iron Laughing Accademy. :cookoo: Don't say we didn't warn you.
  14. wreckerman893

    My First MV Recovery. Three M101's, 1500 miles in an old nissan

    Surely you jest. http://www.youtube.com/watch?v=0A5t5_O8hdA
  15. wreckerman893

    Question for the NHC cummins experts

    You can't gold plate a turd (well you can but then you just have an expensive turd). They are an old school engine built to pull but not run with the big dogs. That may be why the military never added a turbo to the 5 tons like they did to the deuces.
  16. wreckerman893

    Videos of my 5-TON

    You would get a lot smoother ride if you put a couple of tons of sand or other ballast in the bed.
  17. wreckerman893

    M1070 Tech & Tips

    I love it when a plan comes together. http://www.youtube.com/watch?v=FPQlXNH36mI
  18. wreckerman893

    No brakes M813

    DAMIFINO I'd fill it with fluid and have "Soldier B" pump the brakes while I bled the system. It could be leaking from a wheel cylinder, line or the master cylinder/air pack. Make sure you bleed it starting with the wheel cylinder farthest away from the master cylinder. If you see no leaks right...
  19. wreckerman893

    4 Cylinder Cat Deuce?

    Does CAT even make a four cylinder diesel for automotive applications? I don't remember ever seeing one.
  20. wreckerman893

    buying a deuce

    As stated above you are close to scrap price but that would be with the bed on it. The botom line is you are buying an old vehicle that has been through the mill. If it came from a fire department chances are they got it through the forestry service who got it from the army. It went through a...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks