Search results

All I can say is WOW!!! That is one of the best setups I have seen! Great job

Very nice setup.

Just find a very remote area to camp

I'm here in western Nebraska and I'm 3 hours south of Mount Rushmore and I have been camping up there and the roads are very windy and in some places there are some real steep downgrades so double check the brakes as I have seen many run away truck ramps in the area.

I also like the OE look and it might be more to go wrong.

Good looking truck!!!

I just got done with my Behr paint job, it was tan before and I just got the paint matched from the Behr paint codes. Turned out great

I really didn't think the Behr paint would go on this easy with a Hvlp gun with a 1.8 tip. When i got the truck it was very clean and didn't need a lot of body work. I started on a day that was 80 degs and pressure washed it all. I stared by thinning the paint with water and started out. It took...

Well, it was finally nice out about a week ago so my M925A2 went from tan back to 383 green. After reading the posts about Behr paint and how to paint and all the different tricks here is what it looks like.

Here is my m923a2 which was tan and decided to go the homedepot route and got started painting.

I looked over truck from the pictures and the inspection report, and I did some research on problems others have had decided to buy my truck. When I got the truck home and it was all as described. One small problem was in the pictures the windows were both rolled down so the report didn't...

You need to make sure the turrets don't have any valve steams installed, if there is you can't fill from the CTIS wheel valve. You can fill from the back stem to get them filled up.

That is the correct pressure switch, my m925a2 has this switch and it's bad. I jumped the a and b terminal with a paper clip and it's working now.

No the valve core is still on the drill bit

CTIS valve core We'll I've been working on my M939A2 off and on, and I've had trouble filling the two front tires as it takes 15 to 20 minutes to fill one tire from 20psi to 70. I went around to the fronts and decided to tear into it. As you can see in the picture this was hiding in the valve...

Wyomer, what part of Wyoming are you at? I'm in western Nebraska and I'm having about the same Ctis problem with my 939 and I thought we might share some ideas on fixing them.

Hello from Nebraska.

I also installed 4 group 31s in my m939a2 and they fit really tight with the wiring . but I couldn't get the hold down bracket to fit right so when it warms up I'm going to fab up a hold down bracket from the original.

Yes there maintenance free and it's been cold here and I can go out and she will start up. And they had a 18 month free replacement and then prorated.

I went out to the local Napa store and got 4 new batteries with 1100 cca each and i think they were $99.00. Went out today after setting for a week and my m939a2 fired right up at 6 degrees.