• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Guyfang

    MISSING MEP-003A FUEL PUMP

    The question I would have for both of you and any others: 1. What is reliability of these pumps over the years, in particular because the OEM pump above is in "used" condition? Is it better to bite the bullet and spend the extra money for New vs. Used? Ancient question I suppose? These...
  2. Guyfang

    Steel Soldiers MV of the month 2024 - November VOTE HERE!

    Hey! I rode in that vehicle!!
  3. Guyfang

    MEP-002A, will Start, Run then dies....any suggestions?

    Keep in mind, the pre-heaters are ALWAYS on during start, for a reason. So it they do not work, this could be a part of the problem. Check them.
  4. Guyfang

    MISSING MEP-003A FUEL PUMP

    This looks like a knock off, but would have to see/touch it to know. This looks like the real deal. But the proof is the NSN and Part #. COM-5354 | 24 Volt Electric Fuel Pump 24V Electric Fuel Pump For All Military Trucks That Use A 24V System. NSN #: 2910-01-408-1530, 2910-00-930-9367...
  5. Guyfang

    Case M4k TM

    NDT wrote: Can we put these in the TM section please? I put this TM in the TM forum, before I posted here in this thread, so long done. Kleinertn17 Wrote: Must have been down there with the Titan submersible lol. I thought I was half decent at locating items on the net, but this one defiantly...
  6. Guyfang

    Case M4k TM

    It was in the net, just buried.
  7. Guyfang

    Case M4k TM

    OK, will try again. How about this?
  8. Guyfang

    MEP-002A, will Start, Run then dies....any suggestions?

    It might work. But its not listed in FEDLOG as a replacement for the ORG. switch. In the thread you found, its says Adjustable, and the normal switch is NOT adjustable. But who knows? If the price is right, try it. The guy who started that thread did just that and it worked. Try it. BUT first...
  9. Guyfang

    Case M4k TM

    You mean this?
  10. Guyfang

    MISSING MEP-003A FUEL PUMP

    You are also missing a Nut, Bolt and "Star Washer". See the serrated washer on the left side of the AUX E-Pump? That's what you want. These pumps NEED a good ground. Thats what the Start Washer is for. It should be on ALL of the mounting hardware used for the E-Pumps. Yes, part number 72-5313...
  11. Guyfang

    MEP-002A, will Start, Run then dies....any suggestions?

    You wrote: Does this look like the correct OPS? Figured I'd try to find one, or two just in case. It's a Hobbs M4008-15 NOS No. This not the correct switch. First find out if you need the switch. You are getting the cart in front of the horse. Proper troubleshooting saves time and money...
  12. Guyfang

    Ether cylinder, part number

    All three of these companies supplied this starter fluid to the Army. Part numbers : 20030 or 2EH475 OSHKOSH CORPORATION KOLD-BAN INTERNATIONAL, LTD. DAIMLER TRUCKS NORTH AMERICA LLC
  13. Guyfang

    Unidentified trailer

    The Data Plate for this trailer should be on the outside of the trailer. I have seen this trailer when I was in a Missile Maintenance Company. It was used for ADA, Vulcan/Chaparral "Black Box" Repair, and also our TMDE repair Section. Its fairly old.
  14. Guyfang

    MEP-002A, will Start, Run then dies....any suggestions?

    Put a jumper wire in at TB5-8 to TB5-9. Try and start it up. What happens.
  15. Guyfang

    MISSING MEP-003A FUEL PUMP

    Unplug all the pumps. Push in the CB, turn the start switch to run. Two of the wires should have 24 VDC on them. They are the main transfer pumps. The last wire is for the AUX function. You can test the AUX pump by simply hooking up the AUX pump to one of the other two wires that are hot. I...
  16. Guyfang

    Case M4k TM

    As I wrote this morning, I will clean up this thread. All of us were to lazy to look in the TM Forum. Below is the link. Hello I am looking for the service TM for the Case M4k forklift. Any help would greatly be appreciated. This is the TM number I am looking for, -24P is all of the...
  17. Guyfang

    PS Magazines.

    I agree. Maybe we can find someone to help. And to think, I had ALL the issues from the mid 60's to the month before I got out in Feb, 1993. I gave them to my replacement, and my guys wrote me later that he tossed them all out.
  18. Guyfang

    Just beginning my mep-003a journey

    Unlike @Guyfang and others, I am not a certified electrician, so don't rely on my electrical advice. I am NOT a certified electrician in America.
  19. Guyfang

    what do ya know about driving a crane?

    I have a bunch of crane TM's in a HUGE file. If you could give me the TM number, I could look, without trying to look at 2000+ TM's
  20. Guyfang

    what do ya know about driving a crane?

    All ways ready!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks