Search results

I carry way too many spare parts. - Starter (overkill), Waterpump - major work to "field replace", all liquid filters, and many more...... Definitely carry a set of good tools. Small hydraulic jack (Test it to make sure it has enough lift to lift a tire/axle). But what I have had to replace...

I have a 5 kw unit mounted on the top of the Helmet Top tool box, inside the truck, with the exhaust routed outside. I added a 1.5 gallon tank, since I like to run Kerosene for the cleaner, odorless burn. Power comes from a 12v Lifepo4 battery. There is a 2" hole in the top of the box to allow...

To be clear, the plastic piece that broke off wasn’t from shut off solenoid, it was from the secondary solenoid that has a wire inside the pump, I don’t know what that is for, older humvees don’t have that solenoid in there injection pumps The smaller solenoid is the cold advance solenoid.

The galvanized piece is a heat shield that goes over the exhaust manifold. P/N 12339175. there is another small piece that goes on the end.

Check this: 5740072 gasket

Deleted

I found Spray Carburator Cleaner works great for unsticking stuck fuel pump plungers.

Some questions to help us understand the problem better. Did the unit ever run correctly before the single phase conversion? Did it ever run correctly after the conversion? Is the engine laboring, like it's under full load? Does the current go up immediately, or only when the contactor is...

All that rust makes me wonder what the inside of the frame rails looks like.

Take out one of the HID bulbs and compare the base to a halogen bulb. You may be able to replace it with a regular h8 or similar bulb.

At todays' prices, they just need to fill the tank full of diesel.

Well, my curiosity got to me, and I did some further research. One of the NSN documents I found says it is a pressure output port, but not for what purpose. Possibly for a capillary to an actual pressure gage? The doc states "sensor shall have one pressure input connection, one electrical...

That's why it MUST be disassembled, so we can all know. Curious minds want to know....

Could be a small tube they use to purge/gas fill the sensor, then cap it off. Try unsoldering the cap like end piece.

Very reliable machine. You can always buy new sheet metal from miller. I would buy it.

If it is a close fitting joint you might be able to use ABS pipe glue. I have used that on ABS ducting, and it worked great. For larger gaps I have used JB weld Plastic Bonder Structural Adhesive, and Permatex Plastic Welder. If you want a dual syringe with a gun and mixing nozzle, you can get...

Just buy it. Nothing that a hacksaw and welder can't adjust to make it fit.

Looking at the weight difference, makes me wonder if they are all nylon belted, and not steel belted. I could not find that info in the description, but I did come across this statement in their description " The intended purpose of Mud Terrain tire types is off-road use. They are not designed...

Solved that problem. Bought the wife a Blue Parrot trucker headset with bluetooth. She watches her movies on her phone, and I have not heard from her since then. :LOL:

I have not disassembled one of my humvee shocks, but have cut open other ones. Caution, the shocks are presurized with nitrogen. Drilling a big hole too fast will get you sprayed with oil (think of it like drilling a hole into a can of spray paint). I would drill a small (1-2mm) hole on the far...