Search results

Thanks to ust24474vt and USMC 00-08 for helping me find these parts, true friends through SS.

I'm on the hunt for these two brackets on the back of the front seat to attach the document bag.

While reading through some old posts another member with your style of arms posted these numbers. Anco 4101/NAPA 60-750 correct fit but could not find a wiper blade to fit. Anco 4103/NAPA 60-725, used the wiper adapter from these on the 4101. Blade Anco 91-18.

Tailgate, interesting it says "aluminum" tailgate.

Transfer and Brakes. Dated May 86, 15-16 years in service and still publishing information on it.

M11 Decon Authorized Location

Good to hear Tom, look forward to seeing more of it this year.

The arm is adjustable for length, I'm not sure on the spline, I have a pair of these I just need to find them.

Arm is $12.50 and the kit http://saturnsurplus.com/vehicles/sat-51-062c.htm is $19.50

These might work as well. http://saturnsurplus.com/vehicles/51-062.htm

11652522

A lot of people won't have the equipment to weld this which will increase the cost. I would engineer a mount that would replace the front shackle mounts, plug and play will get a lot more customers I believe.

I bought a "new" damaged return from Saturn Surplus, it cost me $100 to get it fixed. These are new radiators, returned to Saturn for shipping damage. As far as I know at this time this is the only option, check to see if they still have one.

Well if it's 12v is the starter 12v as well? stuff we need to know, like if it has been converted to 12v. Here is the factory set up. You should have two large leads and one small one with a Packard connector. #3 large is your ground, lead #12 is the small wire with Packard connector, lead...

Can you post a picture of the back of it? and do you know if it is 24V ? The goat uses a standard 60A 28V alternator but the pulley is special to the goat.

Would have to know the make and model of the alternator in order to help you out.

Are you trying to get the aftermarket one charging or an original ?

No US equipment, RT-524.

Tip is swollen, several threads on here on removing them. I have a special puller that has always worked. If they are not too bad you can get a vice grip on it and pull as you are unthreading and they will "thread out", some times you may need to pry up on the grips to get it to start threading.

From the TM