Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Does sound like a regulator. I had the end plate type on my 60A. It wasn't hard to replace and I did it without removing the alt from the motor. DO DISCONNECT THE BATTERIES FIRST, if you decide to replace the regulator. BUT you should definitely double check all wires, including the exterior...
Glad you caught it TOBASH. Good advice for anyone. I checked my spindles when I got mine from the National Guard. No loose nuts but one bearing was rusted and would have failed in time.
BDGR
Smart idea with the foam. Beats sewing new insulation panels bit by bit like I did. I got halfway and lost interest, it was so tedious. Please let us know how the foam works out. Esp. noise (in my case).
BDGR
Excellent observations. My own experiences corroborate these costs and figures. Still, I enjoy this problem solving, and for me there is plenty of learning going on, which I value for the inspiration and challenges it presents.
I expect even if I focused on additive manufacturing and ran my...
Agreed. I do that when I happen to catch the nozzle at temp, but sometimes it's cold and I'm lazy. But that's what spare nozzles are for, at least in my house :)
BDGR
Absolutely. I have taken to running tool steel nozzles in both extruders now.
You're not kidding about nylon's abrasiveness. I was playing with Taulman Bridge nylon a few months ago, and printed about a three hour job with it. Then I switched filaments and was having a terrible time with a...
Excellent points. I have played with GF ABS and that is pretty strong, and not too expensive. CF ABS and CF Nylon are next, but I want to be really sure before I hit "Print" because they were costly (compared to disposable or often on sale filaments like Amazon Basics or Sunlu).
See you all...
Welcome! Those trailers are out there, so keep an eye out, you'll find one.
Have you heard about the Graves Mountain Rally, which takes place over Labor Day weekend each year? Just west of Culpepper in Syria VA. You are invited.
Bulldogger
Awesomeness, to your comment a few posts ago about cost as one reason to avoid nylon, I have been getting successful prints now for weeks using KAKO string trimmer line from Amazon, $15/Kg (strictly speaking it's $29.99 for a 5lb spool). It is true that my printer was a self-gift, and is more...
Anyone tried nylon for these parts? I'm printing plenty of functional parts with nylon now. It can be tricky, but I figured out its quirks on my printer (CreatBot F430, out of reach for some I admit) and can print almost anything now.
Bulldogger
Check if it is a centerline, rear mounted turbo, or more typical side-mounted forward. Conventional side-mounted turbos will not fit in the HMMWV narrow engine bay. Sorry to rain on your parade, but I am not aware of a common rear mounted turbo civilian diesel truck.
Bulldogger
Try the Hummer Knowledge Base for aftermarket cross-references. As far as Half Shafts, many have had good experience with those from Advance Auto / Autozone. They are the 10K versions with ABS sensor ring, which is not needed typically and some remove it.
BDGR
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!