Search results

Are you waiting for disaster Ted? Update. I will post pics again later. The 1/2 x1 inch hot rolled stock from tractor supply only bent. I then made another and sandwiched the two 1/2 pieces into one big 1 inch bar. I was going to weld them together if they still did not work. Just when I was...

RE: Accessory drive seal leaking bad on cummins engi Bumping the starter did the trick and broke it loose. Thanks for the tip. The bolt is out. Now I need to go find some stock to make the tool. Again, thanks for the help.

RE: Legal issues with transporting "troops" in a D Every state is different. The main key point is if the area was designed to transport passengers. I would say it is. It has side boards that fold down to make seats. The rear has a safety strap to make sure people do not fall out. It will haul...

Accessory drive seal leaking bad on cummins engi Is slinger the one with the arrow pointed to it? Like a washer with teeth on the outside edge? I figure I will see taking it apart, but will the crank flange have a wear sleeve to replace also? Do you happen to have the part numbers for the...

Probably from NTC.

RE: Re: RE: Accessory drive seal leaking bad on cummins engi Good idea with the starter. I will get stock to make the puller. I saw some special pullers on the web but they wanted $250 or so. They bolted in with all the bolts and the middle had a bolt that was turned like a harmonic ballancer...

RE: Re: RE: Accessory drive seal leaking bad on cummins engi I finally got around to the job. Everything came off pretty well. The bushing on the accessory drive pulley was toast. The seal was pretty bad off too. It also became very apparent that the crankshaft seal also was leaking and...

I think some people are missing the fact that you already had a title. A title service will not help you. They have just decided not to register your vehicle. The only way around it is to go the assembled vehicle route and get a state issued vin. If the inspector is doing his job correctly he or...

Looks great. Tell us more about your painting rig. What paint did you use? Carc, Gillespie, Rapco?

I just checked the -20p and it lists one booster assembly for the M1009 and another booster assembly used on all the other Cucv's

Re: RE: Re: RE: Re: Fuel Economy of Alternative fuels It does not really matter, you are still using untaxed fuel. States are different but I think most allow a specific amount of untaxed fuel made by the user such as bio diesel. They could probably get us for using motor oil and not paying...

RE: Is TB 43-0209 Color, Marking and Painting available onli Lance, It is in the Technical Manual section under the resources tab. Below is a link. http://www.steelsoldiers.com/index.php?module=pagesetter&type=file&func=get&tid=1&fid=file&pid=7

I have had the Anco wiper parts on my truck since Feb 2008 and have had no problems with them loosening up. No cutting of the shaft either. The knob is held on by a small nut. No shaft modification and is completely reversible back to the original configuration. As to the filter base, I wonder...

The number seemed to work the the author of the tech article. Did you look at the tech article? Does the filter base look the same or different?

"The flag should not be draped over the hood, top, sides, or back of a vehicle or of a railroad train or a boat. When the flag is displayed on a motorcar, the staff shall be fixed firmly to the chassis or clamped to the right fender.” (U.S. Code, Title 4, Chapter 1, Section 7(b))" The above is...

Sorry. I did not post the article I just passed the info on with the filter. Did you take a look at the tech article on the subject? Did you use the wix number or the napa number? My parts guy crossed the napa number for me so I would guess he might have made a mistake. Let me know so I can find...

RE: Any one near Brooksville, FL 34601 going to the SS GA Ra Thanks for the offers. At least I know it can be done. I just have to work out the deal with the guy. I will let you guys know if I get something going. Thanks again, Chuck

RE: Any one near Brooksville, FL 34601 going to the SS GA Ra They would be floor panels, fenders, and side panels. Everything is mostly flat and the most one would measure is about 4 feet long. The largest panel would be the rear floor and I think that would only be about 3 x 3 feet square. My...

I am thinking about getting some body panels from Mack's Militaria in Brooksville, Fl 34601 for my M151. I have someone that can bring them to me from the rally but need to know if anyone near can grab them and ferry them to the rally for me. Thanks Chuck

No luck. Disregard. Thanks for the offer.