Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
in 15 years of driving all oner the country i have never stopped. for the most part i think they assume you are a military truck. most deuces seem to be invisable to police.
what is the diameter of the crankshaft pulley and what is the dia of the water pump pulley......... i was just guessing, you do the math. bjorn, where does the other 26.5 hp go??
removing the fan is to free up hp. can you imagine how much power it takes to turn that fan at 6000 rpm? i would make my own fan from something else. just some simple machine work.
sure but wouldn't an electric be easier? look up the electric used on the trans oil cooler of 5 ton fmtv. it's in the frame under the bed, it looks like it would be a good choice and is 24 volt. i have one but have not gotten to it yet.
will, my vote is for air over water since you already...
70 mph in a stock truck............. yeah, right. and i have a bridge in new york for sale also. that would only be 3243 rpm.......... maybe down a real steep hill for just a few minutes.
the interconnect idea is old, and is made for most rear wheel drive vehicles for towing. i'm sure with a little looking you could find a suitable unit. go here for some good pics of how it is made: http://www.drivetrain.com/remco.html
as to the over drive it's covered pretty good in the...
just using one lockout hub is by far the cheapest and easiest way. if you match your tires you do not even need that. spend your money on something really useful like my over drive gear set..................
RE: Re: Help with uh-48 multifuel heater.
those heaters are fine when working, but parts are very expensive and low btu output. amphenol connectors very common, mouser or digikey or sometimes evilbay
RE: Re: Help with uh-48 multifuel heater.
that is the space heater that is used in vans like the m-109. go here http://www.tpub.com/content/operatormanuals/TM-9-4520-260-13/
high side solid state relays, 10 pins. 2 different number solid state switches are used, made by ST micro part and available from digikey. 2 VN610 $5.47 and 4 VND600 $4.69
VN610 rated 45 amps and VND600 rated 25 amps each channel. basic soldering skill to replace, (tip: cut all legs, remove with...
the back lighting will never run the battery down. you have some other problem. the leds that light the switch should be able to be on for months at a time with no measureable effect on the batteries. as to finding it in the dark it is no different than the lever switch, you know where it is...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!