• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Elk1111

    Will start only with a squirt of starting fluid. Runs great once started.

    I would run a separate fuel line from a container of clean fuel directly to to injection pump so you eliminate the fuel system. If it starts up after running a bit then at least have narrowed it down to a leak somewhere between the tank and the injection pump.
  2. Elk1111

    Need help with Brakes leaking down and needing bleeding constantly.

    Your order is correct except the drivers front is first then the passenger front last.
  3. Elk1111

    Need Help, Brand new to the Deuce!

    The button controls the quill inside the hydraulic head which in turn controls the timing of the injection of the fuel to each fuel line. If you have fuel to the injection pump but no fuel out of the injection lines it’s usually the bottom came off. You can check this by taking off the center...
  4. Elk1111

    Need Help, Brand new to the Deuce!

    The button under the hydraulic head probably came off. Search Hydraulic head and you’ll find a lot of information on this.
  5. Elk1111

    i know not another tire question

    Just type what your looking for on the internet seach engine and it will pop up. MRAP rims are cheap adapters a little more and tires can go as high as you wanna pay. Just use really strong bolts to bolt them on.
  6. Elk1111

    i know not another tire question

    You can get everything for a lot less than $1000 a wheel and shipping rates are down right now too.
  7. Elk1111

    What fluid goes here?

    Assuming your talking about the power steering on an M54…If so it’s usually hydraulic fluid. Definitely download or buy the TMs though.
  8. Elk1111

    m923a2 recreational vehicle upgrades

    I get to drive by this behemoth at least a couple of times a week and also had the pleasure of speaking with this wonderful couple when they left the truck in New Mexico. My hat is off to anyone that’s willing and able to take a trip like they did and I for one am jealous of the truck and the...
  9. Elk1111

    15.5r20 michelin tires

    The 15.5s are going to be a lot smaller than the 14s. I wouldn’t do it. Bead is the same. 395/85r20s and the 15.5r20s are basically the same size. 15.5 is about 45 inches tall 14s are around 48 inches tall
  10. Elk1111

    Throttle adjustment

    Is the cable to the transmission supposed to move like this or is it supposed to be adjusted and tightened down? Also is there any sources to get new modulator and throttle springs. Mine are a bit worn out.
  11. Elk1111

    M923 & M925 questions

    With the On Spot chains just remember not to go very fast. They are fine till around 35 mph but after that they tend to tear right off. We have been experimenting with snow socks this winter and have actually been pretty impressed with them. They are a lot easier than chains and give pretty...
  12. Elk1111

    Air leak under dash

    Hello from right up the interstate!’
  13. Elk1111

    Air leak under dash

    I’m not exactly positive on this but that looks like your low air pressure switch that shuts off the buzzer once you build air pressure. I would try replacing it. Type in M35a2 low pressure switch and see if it looks the same.
  14. Elk1111

    M35A2 Master Cylinder Bleeding

    Make yourself a pressure blender out of a weed sprayer. It’s pretty easy and it makes the job a lot faster and easier. There’s examples on here somewhere.
  15. Elk1111

    M939 manuals.

    I bought one on EBay last month. Just type in M939 technical manual on your search.
  16. Elk1111

    Dogbones

    I got the front upper done today in about an hour!! I figured out that this “Golden” wedge from Harbor Freight fits right up against the bolts behind the spring pack and a few heavy wacks on the pointed side knocks them loose. Use safety glasses…. I pulled the ends together with a ratchet...
  17. Elk1111

    Dogbones

    How do you guys get everything lined up when your putting the new dogbones on?
  18. Elk1111

    Dogbones

    Got the rear upper done today…The u-bolt nuts wouldn’t budge at all so I put a splitting wedge in there at an angle and knocked the heck out it till it came out. The hardest part was trying to get the new one back in. Just couldn’t get the holes lined up at all. I’m bleeding and bruised but...
  19. Elk1111

    Dogbones

    Thank you for pointing that out. I might as well since I’ll have it apart. I have a full set of the paper TMs coming in this week. I’m getting tired of trying to find what I need on the computer and printing up each set of sheets. I fell like I retain things better by flipping pages kinda...
  20. Elk1111

    Dogbones

    Thank you. I’m not too intimidated by the dog bones. After that I’m replacing all the front axle seals and boots. For some reason that job scares me a bit. A lot more things to keep track of and remember…
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks