Search results

I just threw out my set of donor lines so I don't have any pics I can share. From your picture it look like you used a longer line there, it should be a 12" line. There is a 27" line that goes from the air pack to the tee fitting on the frame, maybe you used that line instead? Ke5eua- I only...

That's pretty cool! Also how did your seat upgrade work out? What seats did you end up using and would you do anything different if you did it again? Any pictures of the new seats mounted? Thanks

There is a ton of brake info in the first 3 posts here: http://www.steelsoldiers.com/showthread.php?123335-DEUCE-BRAKE-LINE-REFERENCE-GUIDE-(Sizes-lengths-fittings)&p=1539040&viewfull=1#post1539040 If you are interested in stainless steel braided hoses for your deuce or 5 ton you can get them...

Just a follow up here. I put together a thread FULL of deuce Brake info. Right now the first post is full of info on brake line lengths & sizes as well as how to make your own hard lines. Post 2 is dual circuit line info, post 3 is full of part numbers for new, replacment, and rebuild kits...

they weren't touching, but really close so it was for peace of mind. I just put some spacers between the mudflap supports and the box floor's crossmembers where they attached. The mudflaps are angled back now.

I moved my m109 mudflaps back a tad with some spacers. There is a pick post 7 here: http://www.steelsoldiers.com/showthread.php?108671-PEASHOOTER-s-M109A3-CAMPER-Build-Thread&p=1376641&viewfull=1#post1376641 Travis I hope you get this tire thing figured out soon. I hate these type of...

Not sure if lots of trucks are like mine but... I put a fuel pressure gauge right on the tank where Rustystud did also. I couldnt get that 1/8npt plug out for the life of me. I had the pump out to replace the gasket which was leaking and ended up drilling & re-tapping the hole (not something I...

If your f250 can't do it just get in touch with mattgunguy and see if he can bring his Prius over;) http://www.steelsoldiers.com/showthread.php?124406-Prius-pulling-A-recovery-of-sorts&p=1549578&viewfull=1#post1549578

That's a great idea on the gauge pod! Looks like it belongs there. I like the creativity!

So you guys have me curious now. I had changed my secondary fuel filters over to a single unit like shown below using a Wix 33352 rated at 6 micron nominal. I had thought about switching over to the same large sized Baldwin BF7587 filter that I put onto the end of my WMO filter setup (the big...

If you cant find one then you can just send it or a scan of it to Greg at dataplates.net in fact he may already have that one. He is the go to guy for plates as of the last year or 2. Fast and affordable.

yes the slotted stuff is the extruded aluminum framing that I got second hand. There are lots of brands of it 80/20 is a common one, ITEM, BOSCH, TSLOTS, PARKER, and Maytec are some other brands. The decking I got from a local extrusion company I found. There are some regular angle pieces also...

Delete

Yeah, my 1988 M109 has a few adjustment notches on the clutch pedal (I just lowered it a week or 2 ago), I haven't looked at the brake pedal yet. That one I would be more concerned about lowering though since it might need the full travel if you loose one brake circuit

I'm 6'3" and it is a tighter fit for my legs. I put an air ride bag in my springer seat in place of the spring so I can control the height a bit with air pressure. That helped a fair amount. I also got a smaller 18" steering wheel for it but the A3 trucks should already have the smaller steering...

Here are some more pictures to show the way it stays up. The last photo from post 159 is just showing the pivot hinge, I showed that because with the pivot I used there would have been a big gap between the deck and trailer so there is a 6" deck area behind the hinge point to fill that space...

After the brake job getting out of control, I didnt plan on getting the "Deck" done before memorial day but my family was out of town for 2 days and the weather was nice so I decided to knock out as much as I could. Here is the fold up/down deck. We really wanted to make the deck after...

Looks good, I'd love to see more pics of your solar setup, and sink/hand pump too.

just so I understand correctly, you have removed the Y splitter you installed on the rear composite lights for your extra lights correct? To help troubleshoot, I'd make sure you unhook that splitter. Take a multi meter on the continuity setting and ground the black lead to a solid ground on...

The headlights wont work because the circuit breaker is tripped (it will auto reset once the short is fixed). Just find the short downstream of the switch. If you have a multi-meter you can set the meter to "continuity", clamp one lead onto a good ground, and then take the other probe and...